JZP-0.8C Rubber Shock Absorber RGD Resistant Non-Magnetic Zero Magnetic Interference Vibration Isolator

Product Overview

The JZP-0.8C is a rubber and metal vibration isolator from the JZP-C series with a nominal load of 0.8 kg. It converts vibration energy into heat and holds precision equipment steady where ordinary pads would drift or harden. Two engineering features define this build: a damping element that resists rapid gas decompression (RGD), and a fully non-magnetic construction that generates zero magnetic interference near magnetic-sensitive instruments.

Key Features

• Rapid gas decompression (RGD) resistance - the damping compound tolerates a fast drop in ambient pressure without blistering, cracking or a permanent change in stiffness, so isolation performance stays consistent in vacuum and high-altitude equipment.
• Non-magnetic, zero magnetic interference - every load-bearing part is non-magnetic, allowing the mount to be placed beside magnetic-sensitive instruments such as imaging systems, electron optics and precision sensors without shifting their fields.
• Combined shock and vibration isolation - one element handles both steady vibration and impact loads, removing the need for two separate devices in series.
• High internal damping, no creep or ageing - the rubber and metal element holds its dimensions and damping value across the service life, so the alignment set at installation is retained.
• Wide operating temperature range - rated from -45 °C to +65 °C, covering cold stores, outdoor cabinets and heated machine rooms alike.
• Rugged, long-life build - a metal/rubber sandwich that resists tearing and fatigue under repeated cycling.
• Resistance to chemical agents, seawater, ozone and UV - the outer surfaces tolerate wash-down, salt air and outdoor exposure.
• Flexible fittings and rapid prototyping - interfaces can be adapted per project, and prototypes are produced quickly for verification.

Technical Specifications

The figures below are the certified parameters of the JZP-0.8C and its sister models in the JZP-C series.

JZP-C Series Nominal Load Range

Every model in the JZP-C series shares the same body and performance envelope; the number in the model name is the nominal load in kilograms.

Typical Applications

The JZP-0.8C is used in precision instrument systems, industrial electronics, laboratory and inspection equipment, medical imaging devices, electric cabinets, cleanroom installations, and also in transport and building structures, where a stable and repeatable isolation characteristic is required and magnetic interference must be avoided.