JZP-0.8C Rubber Shock Absorber Ultrasonic Cavitation Erosion Resistant Phase-Change Thermal Sink Isolator Mount

Product Overview

The JZP-0.8C is a rubber and metal vibration isolator from the JZP-C series with a nominal load of 0.8 kg. It turns vibration energy into heat and keeps precision equipment steady where ordinary pads would drift or harden. Two engineering features define this build: a damping element that resists ultrasonic and cavitation erosion, and a phase-change thermal sink that can be integrated at the mounting point to handle transient heat while the element continues to isolate vibration.

Key Features

• Ultrasonic and cavitation erosion resistance :the damping surface withstands ultrasonic energy and cavitation erosion, so isolation performance holds up in ultrasonic cleaning lines, high-flow fluid equipment and pressure cycling.

• Phase-change thermal sink integration :a phase-change thermal sink can be combined with the mount, drawing transient heat away from the fixing point while the element continues to control vibration.
• Non-magnetic, zero magnetic interference :all load-bearing parts are non-magnetic, so the mount can be installed next to magnetic-sensitive instruments without disturbing their fields.
• Combined shock and vibration isolation : a single element covers steady vibration and impact loads, simplifying the mounting design.
• High internal damping, no creep or ageing : the rubber and metal element keeps its dimensions and damping value, so the alignment set at installation is retained.
• Wide operating temperature range : rated from -45 °C to +65 °C for cold rooms, outdoor cabinets and heated machine rooms.
• Resistance to chemical agents, seawater, ozone and UV : the outer surfaces tolerate wash-down, salt air and outdoor exposure.
• Flexible fittings and rapid prototyping ; interfaces can be adapted per project, with quick prototype turnaround for verification.

Technical Specifications

The figures below are the certified parameters of the JZP-0.8C and its sister models in the JZP-C series.

JZP-C Series Nominal Load Range

Every model in the JZP-C series shares the same body and performance envelope; the number in the model name is the nominal load in kilograms.

Typical Applications

The JZP-0.8C is used in ultrasonic cleaning and fluid-handling equipment, precision instrument systems, industrial electronics, laboratory and inspection equipment, medical imaging devices, electric cabinets, cleanroom installations and thermal-management assemblies, where a stable isolation characteristic is required alongside erosion resistance and magnetic cleanliness.